160 i/6 Rack Screwdriver Set Kraftform Plus Series 100 + Rack
Insulated blades for safe working up to 1,000 Volt
Hard grip zones for high working speed, soft grip zones for high torque transmission
Take it easy tool finder: colour coding according to profile and size
Hexagonal anti-roll feature against rolling away
Lasertip tips for more secure fit in the screw head
Set contents:
Cross slot:
PH1 80 mm
PH2 100 mm
Slot: 0.4 x 2.5 x 80 mm (without Lasertip)
0.6 x 3.5 x 100 mm
0.8 x 4.0 x 100 mm
1 x 5.5 x 125 mm
Rack
6-piece screwdriver set with individually tested, insulated screwdrivers as per IEC 60900. Individual testing in a water bath at 10,000 volts so as to ensure safe working at the permitted voltage of 1,000 volts. Kraftform Plus handle for pleasant, ergonomic working that makes blisters and calluses a thing of the past. Hard gripping zones for high working speeds whereas soft zones ensure high torque transfer. Partially Lasertip: the tip literally bites itself into the screw head and prevents any slipping. "Take it easy" Tool Finder: colour coding according to profile and size. The anti-roll feature prevents any bothersome rolling away at the workplace. Including a rack for storage.
Tested for dielectric strength
Wera's screwdrivers are tested for dielectric strength under a 10,000 volt load to make sure that their most important property, their insulation, has been exhaustively tested. Each individual Wera VDE screwdriver is subjected to this test to safe working up to 1,000 volts.
Reduced contact pressure
Wera Lasertip reduces the contact pressure required and enhances force transfer – meaning less screwdriving effort is required. Screwdriving becomes safer and easier.
Lasertip
A precisely-focused laser creates a sharp-edged surface structure. This laser treatment results in an edge hardness of up to 1000 HV 0.3. Wera Lasertip "bites" itself into the screw head and prevents any slips out of the recess. It is available for screwdrivers for slotted, Phillips and Pozidriv screws.
Impact strength test
Impact strength tested at -40°C, ing safety even under extreme conditions.
Multicomponent Kraftform handle
Wera produces the Kraftform handle out of several materials with different properties. A resistant plastic is used for the core which ensures that the blade is held securely even under high strain. A softer material is used for the coloured soft zones, which provides high frictional resistance and allows the transfer of high forces – resulting in less required screwdriving effort. The red sections with their hard surfaces prevent any "sticking" of the hand to the handle, making rapid repositioning of the hand possible.
Rapid hand repositioning
The hard materials used for the handle ensure rapid hand repositioning without any danger of the skin "sticking" to the handle. The surrounding hard zones with large diameters glide like wheels across the hand.
"Take it easy" tool finder
Screwdrivers with "Take it easy" tool finder: colour coding according to profile and size stamp.
